Aruba Networks AP-105 2x2 MIMO Dual Radio Wireless Access Point 802.11a/b/g/n

Aruba Networks AP-105 2x2 MIMO Dual Radio Wireless Access Point 802.11a/b/g/n

Condition: This item has been removed from a clean office environment. It is sold as the Wireless Access Point main unit only (as pictured). It does NOT include any mounting hardware, PSU or cables.

It is in full working order and has been reset to factory settings. 

It is in very good used condition, there may be a slight bit of yellowing to the plastics and the odd minor scuff/scratch mark, but this is all purely cosmetic and will not affect the performance of the item.

Part/Model Number: AP-105

Warranty: Supplied with 90 Days Return to Base warranty.

Item details/specification.

The Aruba Networks AP-105 is an affordable 802.11n access point designed for high-density indoor deployments in offices, hospitals, schools and retail stores. The compact, high-speed AP-105 delivers wire-like performance at data rates up to 300 Mbps per radio.

The cost effective indoor 802.11n dual-radio, dual-band 105 access point is designed for high-density deployments in offices, hospitals, schools and retail stores.

Aruba Networks AP-105 Key Features

• 2×2 MIMO dual-band 2.4-GHz/5-GHz radios
• Data rates up to 300 Mbps per radio
• 802.11a/b/g/n

The AP-105 features two 2×2 MIMO dual-band 2.4-GHz/5-GHz radios with two internal omni-directional antennas. With ceiling and wall-mounting options, the AP-105 is built to provide years of trouble-free operation.

Working with Aruba’s line of centralized Mobility Controllers, the AP-105 delivers secure, high-speed network services that move users to a "wireless where possible, wired where necessary" network access model. The network can then be rightsized by eliminating unused Ethernet switch ports and thereby reducing operating costs.

802.11n enables the use of wireless as a primary connection with speed and reliability comparable to a wired LAN. It also increases performance by utilizing techniques such as channel bonding, block acknowledgement and MIMO radios. Advanced antenna technology also increases range and reliability.

The key to ensuring wire-like performance and reliability is Aruba’s unique Adaptive Radio Management and spectrum analysis* capabilities, which manage the 2.4-GHz and 5-GHz radio bands to deliver maximum client performance while mitigating any RF interference.

The multifunction AP-105 can be configured through the Mobility Controller to provide WLAN access with part-time air monitoring, dedicated air monitoring for wireless IPS and spectrum analysis, Remote AP (RAP) functionality or secure enterprise mesh. The AP-105 features a 100/1000BASE-T Ethernet interface and can operate from standard 802.3af power-over-Ethernet (PoE) sources or a 12-volt DC power supply.

Specifications.

Application
Value-priced indoor 802.11n dual-radio, dual-band AP for high-density deployments in offices, hospitals, schools and retail stores.

Operating Mode
802.11a/b/g/n AP, air monitor (AM) and Remote AP (RAP)
Spectrum monitor, AM and RAP
AM and RAP
Remote AP
Secure enterprise mesh

Radios
Software-configurable dual radio capable of supporting 2.4 GHz and 5 GHz. Both radios 802.11n capable, implementing 2x2 MIMO with two spatial streams, providing up to 300 Mbps data rate per radio

RF Management
Automatic transmit power and channel management control with auto coverage hole correction via Adaptive Radio Management (ARM)
Spectrum analysis remotely scans the 2.4-GHz and 5-GHz radio bands to provide increased visibility into non-802.11n RF interference sources and their effect on 802.11n channel quality.

Antenna
4 x integrated, omni-directional antenna elements (supporting up to 2x2 MIMO with spatial diversity)
Maximum Antenna Gain: 2.4 GHz / 2.5 dBi, 5.150 GHz - 5.875 GHz / 4.0 dBi

Wireless Radio Specifications
AP type: Dual-radio, dual-band 802.11n indoor
Supported Frequency Bands (country-specific restrictions apply):
 2.400 - 2.4835 GHz
 5.150 - 5.250 GHz
 5.250 - 5.350 GHz
 5.470 - 5.725 GHz
 5.725 - 5.850 GHz
Available Channels: Controller-managed, dependent upon configured regulatory domain
Supported Radio Technologies:
 802.11b: Direct-sequence spread-spectrum (DSSS)
 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
 802.11n: 3x3 MIMO with 2 spatial streams
Supported Modulation Types:
 802.11b: BPSK, QPSK, CCK
 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
Transmit Power: Configurable in increments of 0.5 dBm
Maximum Transmit Power:
 2.4GHz: 23 dBm (limited by local regulatory requirements)
 5 GHz: 22 dBm (limited by local regulatory requirements)
Maximum Ratio Combining (MRC) for improved receiver performance
Association Rates (Mbps):
 802.11b: 1, 2, 5.5, 11
 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
 802.11n: MCS0 - MCS15 (6.5 Mbps to 300 Mbps)
802.11n High-Throughput (HT) Support: HT 20/40
802.11n Packet Aggregation: A-MPDU, A-MSDU

Advanced Features
Integrated RAP, secure enterprise mesh point or portal, and wireless intrusion detection and prevention
Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

Power
48 V DC 802.3af or 802.3at or PoE +
5 V DC for external AC supplied power (adapter sold separately)
Maximum power consumption: 12.5 watts

Interfaces
Network: 1 x 100/1000Base-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
Power: 1 x DC power connector
Other: 1 x RJ-45 console interface

Mounting
Standard: Wall  /  Tool-less Ceiling tile rail (15/16")
Optional mounting kit:
 Solid wall mount bracket Wall box mount bracket (fits standard US single gang wall boxes)
 Ceiling tile rail adapters (15/16" & 9/16" recessed or nonrecessed)
 Ceiling tile rail (15/16" & 9/16" recessed or non-recessed)

Mechanical
Dimensions (unit): 132 mm x 135 mm x 45 mm